24-in. LC Pneumatic Tire Forklift / X-200S
24-in. LC Pneumatic Tire Forklift
X-200S
Click Image to Enlarge
Taylor® X-200S
The X-200S is capable of handling long duty cycles and has a lift capacity of 20,000-lbs. Taylor 24-in Load Center Pneumatic Tire lift trucks are engineered to meet the needs of the following industries: Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring.
Print Friendly
- Capacity: 20000 lbs / 9072 kg
- Capacity (MT): 9
- Load Center (in): 24 in. / 610 mm
- Wheelbase (in): 101.0 in. / 2565 mm
- Engine: QSB4.5-C173 4F
- Transmission: TE-14 4-sp. Powershift
- Mast (ft/Type): 11 UV
- Carriage Att. (in/Type): C-84
- Forks (in): 2.75x7x48
- Brake Type: Hydraulic
- Volts: 24
- Tires: 10.00 x 20 - 18pr
Standard Features: X-200S
- 11-ft ULTRA-VU 2-Stage Mast (139-in lowered height)
- 84-in Pin-type “C” Carriage
- 2.75-in X 7-in X 48-in pin mounted Forks (2.5-in thickness for X-180S forks)
- Cummins QSB 4.5L 173Hp Tier-4 Final diesel engine
- Donaldson dry-type air cleaner w/safety element & restriction indicator(vertical air intake extension with TaylorMax Precleaner)
- Dana TE-14 4-Speed powershift Transmission
- Powertrain Protection System for engine and transmission
- AxleTech PRC-485 planetary Drive Axle with Wet Disc Brakes
- Taylor 300 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
- 10.00 X 20 – 24PR bias pneumatic drive and steer tires
Chassis
- All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
- Bolted counterweight
- Replaceable bolt-on steps and handrails
- Lockable Fuel Cap
- Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.
Cab
- Isolation mounted open operator base with overhead guard and skyview window (includes single brake pedal, dome light, wide angle mirrors, handrails and black floor mats).
- Adjustable Black Vinyl Covered Mechanical Suspension Seat w/Arm Rests
- Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
- Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
- Operator Presence System with timed idle and neutral shutdown (5 minute default,
password adjustable from 1-120 minutes by end user)
- Taylor Integrated Control System (TICS) …see next page for additional info
- TaylorTrak Pro - Advanced Fleet Telematics hardware
- 7-in touch screen color display
- One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
- Color and number coded wiring.
- Dual USB charging ports
- Hydrostatic, steer-on-demand power steering with tilt steering column
Electrical
- 4-volt electrical system with 95 amp alternator
- Dual heavy-duty batteries
- Battery disconnect/lock-out switch
- Circuit breakers with heavy duty connectors (no automotive type fuses)
- Breaker reset switches
- Key-type electronics switch with push button start
- Dual electric trumpet horns (116 dBA)
- Keyswitch-actuated amber strobe light
- Forward actuated warning alarm
Vehicle Information Package
- Operators Guide
- Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
- Safety Check Manual and Video
No video available at this time
Taylor Forklifts of Alabama provides Heavy Duty Forklift sales, parts, and service for the state of Alabama. Taylor Forklifts and Material Handling Equipment are designed, engineered, and manufactured in the United States of America. Industries such as Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring commonly use Taylor® Products.
For information on any of the products we offer, please contact one of our locations