SSI-2020 36-in. LC Pneumatic Tire Forklift / XH-180 Hydro

SSI-2020

36-in. LC Pneumatic Tire Forklift
XH-180 Hydro

XH-180 Hydro ArrayClick Image to Enlarge

Taylor® XH-180 Hydro

The XH-180 Hydrostatic is capable of handling long duty cycles with a lift capacity of 18,000lbs. Taylor 36-in Load Center Pneumatic Tire forklifts are engineered to meet the needs of the following industries: Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring. Own a Taylor forklift and you'll never turn back. That's because Taylor Big Red designs, engineers and manufactures the Ultimate Heavy Lift Trucks
Print Friendly

  • Capacity: 18000 lbs / 8165 kg
  • Capacity (MT): 8
  • Load Center (in): 36 in. / 914 mm
  • Wheelbase (in): 104.0 in. / 2641 mm
  • Engine: QSF3.8-C120 4F
  • Transmission: RexRoth Hydro Trans.
  • Mast (ft/Type): 11 UV
  • Carriage Att. (in/Type): C-72
  • Forks (in): 2.75x7x72
  • Brake Type: Hydraulic
  • Volts: 24
  • Tires: 8.25 X 15 -18PR

Standard Features:

  • 11-ft. ULTRA-VU 2-Stage Mast (119-in lowered height)
  • 72-in Pin-type "C" Carriage
  • 2.75-in X 7-in X 72-in pin mounted Forks
  • Cummins QSF 3.8L 120Hp Tier-4 Final Diesel Engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
  • RexRoth Hydrostatic Transmission
  • Powertrain Protection System for engine and transmission
  • Kessler D-41 HD planetary Drive Axle with Wet Disc Brakes and Park Brake
  • Taylor 125 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle stop (more contact area than bolt heads which require adjustment)
  • 8.25 X 15 - 18PR bias pneumatic drive and steer tires

Chassis

  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.

Cab

  • Isolation mounted open operator base with overhead guard and sky-view window (includes single brake pedal, dome light, wide angle mirrors, handrails and black floor mats).
  • Adjustable Black Vinyl Covered Mechanical Suspension Seat w/Arm Rests (Seat has +/- 15 degree rotation)
  • Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown(5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • Color and number coded wiring.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 70 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type electronics switch with push button start
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward actuated warning alarm

VIP

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
XH-180 Hydro Heavy Duty ForkliftBrochure View *Brochure will open in a new window
View Gallery *Image Gallery will open in a new window
No video available at this time

Taylor Forklifts of Alabama provides Heavy Duty Forklift sales, parts, and service for the state of Alabama. Taylor Forklifts and Material Handling Equipment are designed, engineered, and manufactured in the United States of America. Industries such as Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring commonly use Taylor® Products.

For information on any of the products we offer, please contact one of our locations